just a question about arb`s etc

[AUDI9020V]

hi all ya i know i need a s2 but for the time iam enjoying the 90 20v,anyhow can i fit like a front upgraded arb for a s2 on my 90 also wot other stuff do u recomend to do to stiffen it up apart from poly bushes.as itys getting like a jelly

[CR500Dom]

hi all ya i know i need a s2 but for the time iam enjoying the 90 20v,anyhow can i fit like a front upgraded arb for a s2 on my 90 also wot other stuff do u recomend to do to stiffen it up apart from poly bushes.as itys getting like a jelly

On My 10v 90Q I did thie following:

S2 Springs all round
Bilstein Dampers all round
New Wishbone bushes
New ARB Drop links and bushes
Blue Top mounts
0.5 deg neg Camber all round

End result is stiffer all round while retaining standard ride height and decent compliance

Next step would be Uprated ARBs front and standard one on a front subframe fitted to the rear, along with Aluminium subframe mounts.

If I was doing it again, I would fit Uprated Bilsteins or Konis, and fit a Coilover conversion to them, just to give me more options to experiment with spring rate

HTH
Dom

[rotoryboy]

Trouble with that is his isn't a quattro

[AUDI9020V]

yep ya right mine not a quattro

[CR500Dom]

Set of AVO coilovers on Ebay at the moment, might be of interest